1 使用前请详细阅读本胀套说明
  Please read the instruction carefully before operating;

2 确认现品是否与配置机械的型号一致；
  Ensure whether the product consis with the machine;

3 胀套的组件部分绝对不能使用含钼或硅添加剂；
  Forbid lubricaling the locking assembly fabric with oil containing molybdenum or silicon, which can lessen the locking force;

4 本品指定使用性能等级为12．9级螺栓，切勿用其他螺栓代替；
 The bolts used in our produel is level 12.9.Do not replace them with other;

5 本胀套无中心定位功能，如须此功能，请在轮毂上自行设计；
  The producls have no orientation property, which can be added in the hub with your design.

6 安装胀紧连接套过程，请勿强行敲打。
  Do not hammer strongly when assembling;

7 胀套轴和轮毅的选用公差为h8／H8；
  The recommended tolerance between axis and hub is H8/h8。